FoodPro material

Professional material quality is pure

Ethylene propylene diene rubber (EPDM) polymer is completely saturated and nonpolar hydrocarbyl elastomer, make them in the geometrical structure of the polymer with polar fluids and

Solvent under high temperature is very good compatibility.

This kind of material:

• Chemical resistance is very strong
• In polar solvent, long service life of hot water and steam
• Suitable for contact with alkaline cleaning fluid
• Very suitable for most of the dairy products use and high temperature injection water

Materials technology promotion potential

What we recommend ethylene-propylene rubber brands are peroxide vulcanizing, and contain small amounts of softener and operating auxiliaries, such making that minimizing potential leaching, reduces the risk of contamination.At the same time, they have also been developed has better chemical stability and thermal stability, and comply with FDA 21 CFR177.2600, level 3 - A, USP VI, cytotoxic (USP 87), standard NSF51 and some water.

Use occasions:

• For almost all types of applications, cleaning and disinfection process
• Typical USES are filling, ingredients, pump, pipe and the flange gasket, valve, quick connector, containers, separator, homogenizer, centrifugal separator and the heat exchanger.

Products:

O - ring, square seals, Kantseal, flat seals, gaskets and diaphragm, and fiber enhanced.Ethylene propylene rubber can also be binding on other materials, and the custom parts supply in almost any structure.

Learn more aboutThe application of ethylene propylene rubber

• Used for pipe connectionThe flange gasket
• Quick connectorSuperior in corrosion resistance
• Used for retraction nozzleContainer injection systemThe seal of

In view of the steam environment optimization standard of fluorine rubber

Sealing system for our company (fluorine rubber material performance of the sequence is optimized, make it meet the special standard processing industry.

Materials show:

• Good high temperature properties
• And the scene of the acidic cleaning (CIP) fluid, fatty food, food grade lubricants and the compatibility of the oil

Specially developed V8T41 improves the chemical compatibility, can be as high as 170 ° C / 338 ° F steam environment work.

Products:

O - ring, square seals, Kantseal, flat seals, gaskets and diaphragm, and fiber enhanced.

Fluorine rubber can also be binding on other materials, and the custom parts supply in almost any structure.

Use occasions:

• Fluorine rubber is especially suitable for used in the process in contact with the medium and high fat, such as high temperature of oil and fat..
• Typical USES include mechanical seal, separator, centrifugal separator, pump, containers, valves, heat exchangers and the in-situ cleaning (CIP) and the field disinfection (SIP) process of cleaning equipment.

Fluorine rubber grade

Learn more aboutFluorine rubber applicationContent:

• The mixing valveHelp system to achieve maximum capacity

Excellent chemical resistance

The fluorine rubber (FFKM) material is a ternary copolymer monomer, it's all hydrogen atoms are replaced by fluorine atoms.Hydrogen is not included in molecular chain, make it great

High chemical resistance and heat resistance.Crosslinking they have both in the molecular chain of the elastomer, resilience and sealing force and teflon chemical inertness and thermal stability.

The operation of the incomparable characteristics

Fort Isolast ® is terry seal systems of high fluorine rubber series.It has a broad product on the market today sequence, and can be customized to meet

Set the process requirements.This material is almost completely inert, in a wide range of chemical medium has excellent performance, including organic and inorganic oxide, acid, alkali, amine, ester, and steam, continuous working temperature from 5 ° C / - 1-2 3 ° F to 325 ° C / 617 ° F.

In the experiment, Isolast ® demonstrated all than other types of elastomer and competitors fluorine rubber has better operating characteristics.Has developed a J9515 and J9516 two varieties, conform to the most stringent standards, they are used in sealing corrosive solvent cleaning fluid is very ideal.The longer the life of the seal, the downtime

Reduce, improve production efficiency.

Use occasions

• Isolast ® is elastomer seal in corrosive chemicals and the ultimate solution of extreme temperatures
• Is recommended to use with ethylene propylene rubber or close of fluorine rubber material, but also have highly corrosive medium.

Products:

Can make all kinds of standard and custom shapes.Also, we have developed many creative low cost plan, they make all know about fluorine rubber consumption to a minimumIsolast ® applicationFor more information:

• Quick connectorThe superior chemical resistance
• Used forThe relief valveThe combination of parts
• Can bounce back nozzleContainer injection systemThe seal of

Seal (the system to provide the material with good properties

Because the silicone material on bacteria, mildew and fungus has inherent inertia, used in biological processing, food, beverage and pharmaceutical production is very ideal.

Sealing system (material has provided by the company:

• Good heat resistance, good low tender and soft, and good dielectric properties
• Especially suitable for use in May be exposed to ozone and oxygen
• Working temperature can from 60 ° C / 76 ° F to 200 ° C / 392 ° F
• They are particularly low surface energy means that they will not stick to the mating surfaces
• Long-term compression permanent deformation is small
• Suitable for hot water, animal and vegetable oils, some lubricant and glycerin

If choose the temperature higher than 100 ° C / 212 ° F of acid, alkali, ketone, ester, and steam, will pay attention to, then may appear chemical degradation.

Models for SC6L1 and S700R8 silicone material.

Dynamic and rotating seal components

Ptfe inherently compatible with almost all the chemicals, which makes it ideal to use on the equipment of seals, and exposed to corrosive

Medium, including on-site cleaning (CIP) and the field disinfection (SIP) medium.By adding fillers and the use of special processing craft, can obtain the operation of the specific features.

Turcon ® material has:

• Excellent friction and self-lubricating properties
• Suitable for dynamic and rotating purposes

The world's largest manufacturer of ptfe base material packing

Our sealing systems co., LTD. Is this type of material (sealing parts of the world's largest manufacturer, no other seals manufacturer can offer such a wide range of materials variety.All the materials are made in Europe, the United States, South Africa and

Our own factory production of Asia Turcon ® is ptfe sealing systems company (base material compound ownership of the trademark.

For the high standard of environment and development

Material because there are so many brands to choose from, so no matter what the condition, can have the choice of low cost efficient.For medium seal is not exposed to the process conditions, it is not necessary to meet some of the arguments.In this case, the T05, T19 or T46 is a standard option.Material in some situations require the examination and approval, so we developed a Turcon ® MF series to meet the biological processing, food, beverage and pharmaceutical production requirements.

Turcon ® MF, designed to process requirement

These materials varieties using the ultra clean technology, USES the high purity of the ptfe raw materials and additives, their surface is smooth, has a high gloss, and low porosity, avoid the risk of the pollutant accumulation, and reduce the possibility of debris particles flake.

Each batch of Turcon ® MF material using high grade raw material only.Visual inspection before shipment, all products, and can issue the certificate of approval.

Use occasions:

• For static, reciprocating and rotating purposes
• For production line do not suddenly stop drug and plasma production
• On multipurpose equipment, mixing process fluid, seal is exposed to a variety of highly corrosive cleaning solvents and cleaning (CIP) in the fluid at the scene
• Low and high temperature environment

Learn more about Turcon ® application information:

• Type Gao Qingjie Turcon ® Variseal eliminatedFilling machineThe pollution in
• To improveThe coffee machineThe wear resistance

Zurcon ® for reciprocating and working condition of oscillation

Zurcon ® is our sealing systems company (brand name in the development of the plastic substrate materials series.Friction characteristics of the material very wear-resisting means it used for reciprocating, very slow rotation and oscillation condition is very ideal.

Zurcon ® Z80

Continuous working temperature of 1 9 6 ° C / - 3 2 1 ° F to 8 0 ° C / 1 7 6 ° F, in the short term can be as high as 125 ° C / 275 ° F.It can tolerate all aqueous alkaline cleaning agent, and have no higher than 115 ° C / 239 ° F cross of the steam cycle.Zurcon ® Z80符合FDA 21 CFR177.1520，适合用于食品加工用途。

Zurcon ® Z2221

Zurcon ® Z2221 is specially developed for manufacturing seals patent pu material.The wear resistance of the material is good, compression permanent deformation is small, wide working temperature range, from 6 to 3 ° C / - 2 2 ° F to 1 1 0 ° C / 2, 3, 0 ° F, 1 CFR177.1680 conforms to A 2 D F, suitable for all kinds of requires chemical endurance food USES.It can tolerate a lot of aqueous alkaline cleaning agent, and have no higher than 115 ° C / 239 ° F cross of the steam cycle.